Circuit Laws and Network Theorems
KCL and KVL, nodal and mesh analysis, source transformation, superposition, Thevenin and Norton theorems, maximum power transfer, star-delta conversion, and reciprocity.
Every circuit question starts from two laws and a handful of theorems that simplify a network before you solve it.
Basic laws
- Ohm's law: V = IR.
- KCL: the sum of currents leaving a node is zero (charge conservation).
- KVL: the sum of voltages around any closed loop is zero (energy conservation).
- Series resistors add; parallel: 1/R = Σ 1/Rᵢ. Two in parallel: R₁R₂/(R₁ + R₂).
- Voltage divider: V₁ = V R₁/(R₁ + R₂). Current divider: I₁ = I R₂/(R₁ + R₂).
Systematic analysis
- Nodal analysis: pick a reference node, write KCL at the other (n − 1) nodes in terms of node voltages. A voltage source between two non-reference nodes forms a supernode.
- Mesh analysis: write KVL around each mesh in terms of mesh currents (planar circuits). A current source shared by two meshes forms a supermesh.
- Number of independent equations: nodal n − 1; mesh b − n + 1 (b = branches).
Theorems
- Source transformation: voltage source V with series R ⇄ current source V/R with parallel R.
- Superposition (linear circuits): find the response to each independent source alone (voltage sources shorted, current sources opened) and add. Not valid for power.
- Thevenin: any linear two-terminal network = V_th in series with R_th. V_th = open-circuit voltage; R_th = resistance seen with independent sources killed, or V_oc/I_sc (needed when there are dependent sources).
- Norton: I_N = short-circuit current in parallel with R_N = R_th.
- Maximum power transfer: R_L = R_th, giving P_max = V_th²/(4R_th) at 50% efficiency.
- Star–delta: R_Y = (product of the two adjacent Δ resistors)/(sum of all three); for equal resistors R_Y = R_Δ/3.
- Reciprocity, Millman, Tellegen (Σ v i = 0 over all branches) and substitution theorems.
Worked example
A 12 V source with internal resistance 2 Ω feeds a 4 Ω resistor in parallel with a 4 Ω load. Find the Thevenin equivalent seen by the load.
- V_th = 12 × 4/(2 + 4) = 8 V. R_th = 2 ∥ 4 = 1.333 Ω.
- Load current = 8/(1.333 + 4) = 1.5 A; maximum power would be 8²/(4 × 1.333) = 12 W at R_L = 1.333 Ω.
Practice
Three resistors of 30 Ω each are connected in delta. What is each resistance of the equivalent star in Ω?
Show answer and explanation
Answer: 10R_Y = (30 × 30)/(30 + 30 + 30) = 10 Ω.
A network has V_th = 20 V and R_th = 5 Ω. What is the maximum power (W) it can deliver to a load?
Show answer and explanation
Answer: 20P_max = V_th²/(4R_th) = 400/20 = 20 W.
A circuit has 6 branches and 4 nodes. How many independent mesh equations are needed?
Show answer and explanation
Answer: 3Meshes = b − n + 1 = 6 − 4 + 1 = 3.
Superposition cannot be used directly to find:
Show answer and explanation
Answer: CPower is proportional to I², which is not linear, so powers from each source cannot be added.